Mercury capture into biogenic amorphous selenium nanospheres produced by mercury resistant Shewanella putrefaciens 200

Shewanella putrefaciens 200, resistant to high concentration of Hg(II), was selected for co-removal of mercury and selenium from aqueous medium. Biogenic Hg(0) reduced from Hg(II) by S. putrefaciens 200 was captured into extracellular amorphous selenium nanospheres, resulting in the formation of stable HgSe nanoparticles. This bacterial reduction could be a new strategy for mercury removal from aquatic environments without secondary pollution of mercury methylation or Hg(0) volatilization.     

Enhancing the total organic carbon measurement efficiency for water samples containing suspended solids using alkaline and ultrasonic pretreatment methods

In this study,we investigated the effect of sample pretreatments(ultrasonication and alkaline extraction) on total organic carbon(TOC) measurements for water samples containing suspended solids(SS) of four different origins(algae,soil,sewage sludge,and leaf litter) to more clearly assess the impact of particulate organic carbon(POC) in water.The effects each of ultrasonication(power,pulse,etc.) and alkaline extraction condition(concentration,time,etc.) on the TOC recovery and precision were investigated,and the results were compared with those of a new sample pre treatment method combining both methods.Alkaline treatment(0.01 mol/L NaOH) showed higher precision than ultrasonication(100/5 on/off pulse),and notably,the differences among the measured TOC values in samples of different origins were also further reduced in the alkaline treatment.This suggests that the ultrasonic pretreatment results can be mainly attributed to the increase in POC recovery through particle size reduction,whereas the alkaline treatment results are achieved through the enhancement of POC solubilization.It is also particularly noteworthy that a higher TOC recovery of 87.6%±7.4% with a higher precision of 8.4%could be obtained using the combined method,compared to each treatment(ultrasonic:TOC recovery 34.7%,relative standard deviation 63.1%;alkaline:49.6% and 23.0%,respectively).Thus,simultaneous pretreatment with ultrasonication and alkaline extraction is expected to increase the oxidation rate of organic matter and the homogeneity of the samples,minimizing the loss of POC measurement values,and thereby improving the reliability of the TOC measurements of water samples containing SS.     

Simplified LCA and matrix methods in identifying the environmental aspects of a product system

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.     

Oxygen-enriched air for co-incineration of organic sludges with municipal solid waste: a pilot plant experiment

Pilot-plant experiments were performed to evaluate the effect of oxygen enrichment on the co-incineration of MSW and organic sludge from a wastewater treatment facility. Combustion chamber temperatures, stack gas concentrations, i.e., CO(2) and CO, and the residual oxygen were measured. The maximum ratio of organic sludge waste to total waste input was 30 wt.%. Oxygen-enriched air, 22 vol.% (dry basis) oxygen, was used for stable combustion. As the co-incineration ratio of the sludge increased, the primary and secondary combustion chamber temperatures were decreased to 900 and 750 degrees C, respectively, approximately 100 degrees C below the proper incineration. However, if the supplied air was enriched with 22 vol.% (dry basis) oxygen content, the incinerator temperature was high enough to burn the waste mixture containing 30 wt.% moisture sludge, with an estimated heating value of 6.72 MJ/kg. There are two main benefits of using oxygen enrichment in the co-incineration. First, the sensible heat can be reduced as the quantity of nitrogen in the flue gas will be decreased. Second, the unburned carbon formation is reduced due to the oxygen-enriched burning of the waste, despite an increase in the sludge co-incineration ratio.     

Longevity of organic layers of vertical flow ponds for sulfate reduction in treating mine drainages in South Korea

This study was carried out to evaluate longevity of available organic materials used for sulfate-reducing bacteria (SRB) activity in vertical flow ponds (VFPs) to treat mine drainage in South Korea. Spent mushroom compost samples (SMC) were tested as substrates in VFPs and analyzed for total organic carbon in VFPs, and were collected to analyze total organic carbon (TOC), T-N, T-P, K, metals and residual cellulose to check the longevity assessment. Chemical analysis revealed that the average contents of Fe, Al and Mn in SMC of VFPs were 19,907, 32,137 and 434 mg/kg, respectively. The contents of Fe and Al in SMC of VFPs were much higher than those of the unused SMC (control), but to the contrary, those of Mn showed a reversed tendency. Average TOC content of the controls was 64.19% but in one of the VFP substrates was as low as 15.92%. This might be resulted from SRB consumed the available organic carbon in SMC as VFPs system aged. Contents of T-N in VFPs tended to decrease as VFPs aged. The residual cellulose ranged from 3.88 to 6.72% (g/g). There existed a negative relationship between residual cellulose contents and ages of VFPs. Assuming that SMC in all VFPs had similar compositions when the VFPs were initially established, trend analysis predicted that the amount of carbon source for SRB might be available for 12–15 years further, depending on VFPs.     

The effects of soil properties on the turbidity of catchment soils from the Yongdam dam basin in Korea

Environmental concerns have been raised that suspended solids in turbid water adversely affect human health, and that their removal increases in the cost of water treatment. The Yongdam dam reservoir, located in the southwestern region of Korea, is severely affected by inflowing turbid water after storms. In this study, soil samples were collected from 37 sites in the Yongdam upstream basin to investigate mineralogical and environmental factors associated with the turbidity potential of soils in water environments. Turbidity potential was estimated by measuring the turbidity of soil-suspension solutions after settling for 24 h. The mineralogy of the soils was dominated by four minerals—quartz, microcline, albite, and muscovite—with lesser amounts of hornblende, chlorite, kaolinite, illite, and mixed layer illite. The quartz content was the most variable of the soil mineralogy among the collected samples. Principal-components analysis (PCA) was used to examine relationships between turbidity potential and other soil properties. The variables considered in the PCA included turbidity potential, quartz content, albite content, mean size of soil particles, clay content, clay mineral content, zeta potential, conductivity, and pH of the soil-suspension solution. The first two components of the PCA explained 52% of the overall variation of the selected variables. The first component was possibly explained by physical properties such as the size of the soil particles; the second was correlated with chemical properties of the soils, for example dissolution and extent of weathering. Closer examination of the PCA results revealed that the quartz content of the soils was negatively correlated with their turbidity potential. A linear correlation (r = 0.63) was obtained between measured turbidity potential and that predicted using multiple regression analysis based on the content of clay-sized particles, clay minerals, and quartz, and the conductivity of the soil-suspension solution.     

Copper leaching from brake wear debris in standard extraction solutions

Quantification of the copper content of and copper leaching from a disc brake wear debris sample was performed using microwave-assisted acid digestion, the Federal Toxicity Characteristic Leaching Procedure (TCLP), and the State of California Waste Extraction Test (WET). The brake wear debris tested was a composite sample obtained from a brake dynamometer test of one brake pad source material. Comparative digestion studies demonstrated that a modified aqua regia matrix (HNO3:HCl:H2O2 = 1:3:0.5) optimized the digestion effectiveness for determining the total copper content in the brake wear debris. No significant sample heterogeneity within the brake wear debris was observed, based on statistically indistinguishable total copper content results for subsamples with a wide range of sample masses. Upon pooling all subsample results, an overall total copper content for the composite brake wear debris sample was determined to be 10.8% (g/g), with a 95% confidence limit of +/- 0.5% (g/g). Copper leaching increased with decreasing solid-to-liquid ratios in TCLP tests, but was unaffected by the solid-to-liquid ratio in the WET. For a 1:10(4) (g/g) solid-to-liquid ratio, 85% and 99% of the total mass of copper present in the composite brake wear debris sample was leached into solution during the TCLP and WET, respectively. Rate studies also demonstrated that the WET resulted in a faster rate and higher extent of copper leaching relative to the TCLP. Compared to reference copper-containing materials, the composite brake wear debris sample exhibited relatively higher TCLP and WET copper leaching characteristics. The higher copper leaching exhibited by the brake wear debris sample may have resulted from its higher specific surface area and/or from changes in the chemical form of copper that occurred during the braking process.     

From manager's emotional intelligence to objective store performance: Through store cohesiveness and sales‐directed employee behavior

The relationships among manager's emotional intelligence, store cohesiveness, sales‐directed employee behavior, and objective store performance were investigated. Non‐managerial sales employees of a large retail electronics chain in South Korea (N = 1611) rated the emotional intelligence of their own store managers as well as the group cohesiveness within their stores. Store managers (N = 253) separately rated the sales‐directed behavior of their employees. Objective sales data were collected one month later for each store. No direct relationship between manager emotional intelligence and objective store performance was found. Instead, the results supported the hypothesized four‐variable, three‐path mediation model: store manager's emotional intelligence was related to store cohesiveness, which in turn was related to the sales‐directed behavior of the frontline employees, which ultimately predicted the objective performance of the stores. Manager emotional intelligence and store cohesiveness are seen as intangible organizing resources or socio‐psychological capital for non‐managerial store employees. Implications for future research and more effective management of retail firms are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Responses of the Indian major carp Labeo rohita to deltamethrin at acute and sublethal concentrations

The effects of deltamethrin at acute and sublethal concentrations on some hematological and biochemical profiles in the Indian major carp Labeo rohita have been examined. The lethal concentrations (LC₅₀) of deltamethrin for 24 and 96 h were found to be 0.44 and 0.38 mg L^?1, respectively. During acute treatment (24 h), hemoglobin (Hb), hematocrit (Hct), red blood cell (RBC), white blood cell (WBC), mean cellular volume (MCV), mean cellular hemoglobin (MCH), and mean cellular hemoglobin concentration (MCHC) values were significantly increased compared to control group. Plasma glucose, protein, cholesterol, albumin, globulin, triglyceride, and glycogen in gill and muscle were significantly decreased. Upon sublethal treatment (0.044 mg L^?1, 10th of 24 h LC₅₀), RBC and the biochemical parameters, except glucose and cholesterol, decreased significantly, while MCV, MCH, and MCHC values increased up to the 28th day and then declined. Cholesterol level was significantly increased throughout the study period. A biphasic response in the levels of Hb, Hct, WBC, and glucose were observed during sublethal treatment.